DIY Holiday Deer Decal

DIY Vinyl Holiday Label Decal Tutorial

Deer lotion bottle DIY vinyl decal

Supplies:

• Bottle of Moisturizing Lotion

• Gold Adhesive Vinyl from Happy Crafters

• Transfer Paper

Tools:

• Silhouette Cameo Vinyl Cutter

First, remove the label from your lotion bottle.

lotion bottle decal tutorial

I purchased deer head art through my Silhouette Software and used Helvetica font for my letters. I created my design to measure about 3″ x 3″ to fit my lotion bottle. I put in my the vinyl color side up and changed the Silhouette blade settings for cutting standard vinyl and sent to ‘cut’.

cutting vinyl decals

Weed away the vinyl surrounding your desired design.

deer decal

Using transfer paper, I took my credit card and rubbed firmly onto my design to lift it off my carrier sheet.

vinyl decal label tutorial

Pull away the carrier.

vinyl decal label tutorial

Next, place your transfer paper with your decal on it onto the front of the lotion bottle and rub the design again with a a credit card. If your vinyl doesn’t want to stick to your bottle, re-apply and rub again.

lotion label decal

Peel away the transfer paper.

Vinyl lotion label decal DIY

Now you have cute guest room accessory!

Deer lotion bottle DIY vinyl decal

Or a cute little personalized DIY gift for friends or family, or maybe as a teacher gift?!

DIY gifts
*This post is sponsored by Happy Crafters. Tutorial, experience and opinion are my own. See more projects at Happy Crafters blog.

HClogopngsmall

Thanksgiving Jars Tutorial

Thanksgiving-Blog52

This year for Thanksgiving, I wanted to show off what I am most thankful for: my new crafting skills! I love the country, rustic look so I thought cute mason jars using adhesive vinyl would be great with my Thanksgiving decor. I made these cute sayings to keep everyone in the thankful spirit round the table.

Materials I Used:
• OraCal 651 Glossy Adhesive Vinyl Brown – Small
• (4) Mason Jars
• Roll of Twine
• LED Candle Lights
• Silhouette Cameo® Vinyl Cutter

*I found my jars, twine and candle lights at Michaels’ Craft Store

Project Time:
20 minutes

After I designed my phrases in my Silhouette Software, I measured how much space I needed on my jars and sized my letters to match. Once they were at the right size, I sent my designs to my Silhouette and cut.

Next, I cut enough transfer paper for each phrase, smoothed it out over top of my sheet of vinyl using a credit card then peeled the paper back revealing only what I wanted to apply.

Next, I just stuck my transfer paper with my phrase straight onto my jars. Smoothed again using my credit card and peeled the transfer paper right off. I tied my twine along the rim of the Mason jar and popped my LED candle lights into the bottom of the jar.

Then I repeated these same steps for my remaining jars.

Once they were done, I finally found the motivation to take down my Halloween decorations and put up my Thanksgiving display.

Hoping these jars spark some happy conversation around the dinner table! Have a wonderful Thanksgiving everyone! Gobble, Gobble!

You can find more projects like these at HappyCrafters.com/blog, or check out our FacebookTwitter, and Pinterest pages to see what others are crafting!

“Incredibles” Iron On Vinyl Tutorial

This post is brought to you by Happy Crafters. All opinions are 100% mine!

layered heat transfer tutorial

If you make handmade Halloween costumes, you know this week is crunch time! {Unless you are the super-on-top-of-it crafter, then you’re probably done already! I am not.} I am definitely a procrastinator when it comes to Halloween costumes. {raise your hand if you’re with me on this!}

I make their costumes every year, but I am literally still hot gluing as the kids are walking out the door to trick-or-treat on Halloween! And this year of course is no exception. I just started making costumes yesterday…. 🙂 And for the first time, the whole family is dressing up for Halloween. Typically, I only have to make 2 costumes {for my 2 boys}, but this year, I have to make 5 since we have a new addition to the family. Awesomesauce. So I now have to bust out 5 costumes this week…yikes! But thankfully, we’re doing something fairly easy. We’re going to be The Incredibles family, just like the movie. And thanks to my trusty Silhouette and some heat transfer vinyl from Happy Crafters, I’ve got the shirts practically done!

handmade incredibles costume

First, I designed the Incredibles symbol using my Silhouette Studio software. The Designer software and the extra tools that came wiith my Silhouette makes it really easy to design your own shapes.

incredibles-shirt2


I used 3 different colors of heat transfer vinyl for the logo: black, yellow, and orange.

Layered Heat Transfer Tutorial

Screen Shot 2013-10-27 at 9.34.42 PM

1. Using the circle tool, I created 3 ovals and used the text tool for the “i”.

2. Then I used the eraser tool to remove the extra lines to create the swooshes around the “i”.

3. Next, I flipped it horizontally before cutting. {this is really important if you are cutting words}

4. I fed the heat transfer vinyl into my Silhouette machine WITHOUT a cutting mat and with the plastic side down.

5. Remove the extra vinyl around your design.

6. Iron the heat transfer with the plastic side up with a cloth over it, for about 45-60 seconds, pressing down firmly. I ironed the orange first {I did not remove any of the orange heat transfer from the logo. I used the entire logo since it was my base color}, then I ironed the black on top of the orange, and then the yellow. {iron for the full time for each additional layer of heat transfer. Allow to cool for a couple minutes between layers.}

*Tip: Heat transfer should look like it melted into the fabric. If it is merely sitting on top, then you’ll want to iron longer. I highly recommend using a stopwatch or clock so your timing can be exact.

incredibles-shirt3

So what you see is about all I’ve gotten done with their Incredibles costumes. I’m hoping I’ll be lucky enough to get them done BEFORE Halloween so that I can post pictures! {I never posted last year’s costume pics because they got done too late!} You can check out the cute handmade Bob the Tomato and Larry the Cucumber costumes from 2 years ago here.


Have you finished your Handmade Halloween Costumes yet?

You can connect with Happy Crafters on TwitterFacebook, and PinterestDon’t miss a Craft! Follow Craftaholics Anonymous® on Bloglovin and on Pinterest! Disclosure: I received one or more free products featured in this post. See my disclosure page for a complete statement.

“Save the Racks” Tutorial

In honor of the annual Breast Cancer Walk in my home town, I decided to make a custom sweatshirt to wear and show off my pink proudly. I saw an idea similar to this from last year and wanted to try it myself this year.

What you’ll need:

• Happy Face Pattern Iron On Vinyl – Pink Camo

• Happy Face Glitter Iron On Vinyl – Tutu Pink Bling

• Silhouette Cameo® Vinyl Cutter

• Silhouette Software

• Standard Iron

• Sheet or Piece of Scrap Fabric

Project Time:

• 30 minutes

First, I found deer antlers, a Breast Cancer ribbon, and text, vectorized, and uploaded it to my Silhouette Software.

 

Always remember to mirror images before cutting..

Next, send your designs to your vinyl cutter. Be sure you have the right vinyl for the right cut job. I cut my pink camo vinyl first, then my tutu pink bling vinyl. Since my bling vinyl is thicker than my camo, I adjusted my cutting blade to a “3” instead of a “1” and it cut perfectly.

Finally, start ironing! You need to make sure your iron is or the hottest setting possible. The bling vinyl was being difficult because my iron was not hot enough. But with some more pressing time, it worked out perfectly!

 

Slowly pull off the carrier while it’s still warm and you’re finished!

 

My friends were in amazed at how cute it turned out and I may have converted them over to the craft side!

For more project ideas, check out our blog each week with great step-by-step tutorials! You can also go to our FacebookTwitter, and Pinterest pages for more inspiration.

Personalized Halloween Treat Bags

If you haven’t had a good reason yet to revamp your kids’ trick-or-treat bags, check this project out! Roeshel of DIY Show Off shows us how to create these fun, personalized bags for trick-or-treating! Keep them around for the whole month as a school tote or sleep over bag!

DIY personalized trick or treat bags

Materials:

DIY personalized trick or treat bags

• Canvas/Linen Tote Bags

• Fabric Paints

• FrogTape® Shape Tape (I used all 3 patterns: chevron, wave and scallop)

• Stencils (I created my own stencils using glossy black vinyl and transfer paper from Happy Crafters)

Tutorial: Part 1 – Shape Tape

Iron the tote bags to remove wrinkles. Insert cardboard into the tote bag (to block bleed-through to the other side). Cut a piece of FrogTape Shape tape a little wider than the bag. Decide placement. Remove half of the strip of wax paper backing from the Shape Tape. Position and press into place. Remove the other half of the wax paper backing and smooth into place. I found that securing the edges of the tape to the table underneath on the sides, kept my tote bag from sliding around, holding it in place for painting. Repeat step 3 to create a ‘stencil’ border/line for the design.  Using a credit card, I rubbed the Shape Tape to make sure it was nice and secure, sticking to the canvas…check closely to be sure the Shape Tape is complete adhered to the canvas.

DIY personalized trick or treat bags

Paint! Be careful not to lift the Shape Tape. It helps to move the paint brush from on the tape moving to the fabric rather than starting on fabric and pushing paint to the tapeline.  Remove Shape tape. Nice crisp lines!!! Let the paint dry.

DIY personalized trick or treat bags


Part 2 – Vinyl Stencils

Using my Silhouette designer studio software, I created name stencils as well as purchased a few Halloween shapes from the Silhouette American online store. Then sent it to cut to create vinyl stencils.

DIY personalized trick or treat bags

Peel away lettering and design to create a stencil. Using transfer paper, position vinyl stencil on tote, rub with a credit card and remove transfer paper – leaving the vinyl stencil in place on the canvas.

DIY personalized trick or treat bags

Paint and remove vinyl. Allow paint to dry 4 hours.

*Using a black Sharpie, I traced around the ghost where his white body met with the white chevron.

DIY trick-or-treat bags

Personalized and so fun! Years of use! Machine washable (inside out) after 72 hours.

DIY personalized trick or treat bags

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. See more projects at Happy Crafters blog.

HClogopngsmall

Pink Camo Iron On Vinyl Tutorial

In support of National Breast Cancer Awareness during the month of October, Roeshel of DIY Show Off created a beautiful shirt using our pink camo iron on vinyl for her sister currently battling breast cancer. If you want to show your support and help raise awareness during the month of October for those who have been affected by Breast Cancer, visit http://www.nationalbreastcancer.org/breast-cancer-awareness-month.

Happy Crafters pink camo iron-on vinyl tutorial:

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

You’ll need:

• T-Shirt

• Pink Camo Patterned Iron-on Vinyl from Happy Crafters

• Vinyl Cutter

• Weeding Tool

• House Iron

• Scrap Fabric for Heat Application

How to Make This Project:

1. First, I started by creating and sizing my design using my Silhouette Design Studio software.  Next, MIRROR/FLIP YOUR DESIGN (right click, “flip horizontally”)!  This is an important step!

mirror image vinyl design

2. With the pattern side facing down, load vinyl sheet into your machine.

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

3. Send the design and ‘cut’.

4. Once it’s done cutting, weed the excess material.

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

5. Place design onto t-shirt. sticky side down

6. Cover design with a cotton dishcloth or a piece of scrap cotton fabric. Iron on a high temperature, pressing down firmly for about 25-30 seconds on each part of the design for full coverage

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

7. Remove the clear carrier away from your design

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

I repeated the same steps to adhere a small design to the back of the t-shirt as well

Here it is all finished!

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

Here’s the design on the back:

Iron On Vinyl t-shirt Tutorial at diyshowoff.com

Check out the other patterns available too! *This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.

HClogopngsmall

Halloween Pumpkin Decals

Roeshel of DIY Show Off shows how to use our black adhesive vinyl to create stunning Halloween décor using pumpkins!

pumpkin vinyl decal tutorial


Materials:

 Happy Crafters Happy Face Large Glossy Adhesive Vinyl (Black)

• Transfer Paper

• Pumpkins

Tools:

• Silhouette Cameo Vinyl Cutter

How to make vinyl decals for pumpkins tutorial:

1. Create design. I purchased a deer silhouette and frame from the online store and sized them in my Silhouette Studio designer software to fit my pumpkins.

DIY vinyl pumpkin decals

2. Send decals to “cut”.

DIY vinyl pumpkin decals

3. Weed the negative part of the design

DIY vinyl pumpkin decals

4. Cut transfer paper to size. Peel away wax paper backing and smooth transfer paper into place.

DIY vinyl pumpkin decals

5. Rub design with a credit card.

DIY vinyl pumpkin decals

6. Peel away paper backing from the vinyl decal, transferring it to the sticky transfer paper.

DIY vinyl pumpkin decals

7. Position on pumpkin and lightly rub decal with a credit card.

DIY vinyl pumpkin decals

8. Peel away transfer paper. This might get a little tricky because of the pumpkin’s uneven surface. You may have to use your fingernail to help with the transfer.

DIY vinyl pumpkin decals

9. There are also wrinkles in my vinyl decal…but it doesn’t take away from the design. I just smoothed it down the best I could using my fingernail and credit card.

DIY vinyl pumpkin decals

To complete this display, see the tutorial for the candy corn here.

DIY vinyl pumpkin decals
DIY vinyl pumpkin decals



*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own.

HClogopngsmall