Personalized Halloween Treat Bags

If you haven’t had a good reason yet to revamp your kids’ trick-or-treat bags, check this project out! Roeshel of DIY Show Off shows us how to create these fun, personalized bags for trick-or-treating! Keep them around for the whole month as a school tote or sleep over bag!

DIY personalized trick or treat bags

Materials:

DIY personalized trick or treat bags

• Canvas/Linen Tote Bags

• Fabric Paints

• FrogTape® Shape Tape (I used all 3 patterns: chevron, wave and scallop)

• Stencils (I created my own stencils using glossy black vinyl and transfer paper from Happy Crafters)

Tutorial: Part 1 – Shape Tape

Iron the tote bags to remove wrinkles. Insert cardboard into the tote bag (to block bleed-through to the other side). Cut a piece of FrogTape Shape tape a little wider than the bag. Decide placement. Remove half of the strip of wax paper backing from the Shape Tape. Position and press into place. Remove the other half of the wax paper backing and smooth into place. I found that securing the edges of the tape to the table underneath on the sides, kept my tote bag from sliding around, holding it in place for painting. Repeat step 3 to create a ‘stencil’ border/line for the design.  Using a credit card, I rubbed the Shape Tape to make sure it was nice and secure, sticking to the canvas…check closely to be sure the Shape Tape is complete adhered to the canvas.

DIY personalized trick or treat bags

Paint! Be careful not to lift the Shape Tape. It helps to move the paint brush from on the tape moving to the fabric rather than starting on fabric and pushing paint to the tapeline.  Remove Shape tape. Nice crisp lines!!! Let the paint dry.

DIY personalized trick or treat bags


Part 2 – Vinyl Stencils

Using my Silhouette designer studio software, I created name stencils as well as purchased a few Halloween shapes from the Silhouette American online store. Then sent it to cut to create vinyl stencils.

DIY personalized trick or treat bags

Peel away lettering and design to create a stencil. Using transfer paper, position vinyl stencil on tote, rub with a credit card and remove transfer paper – leaving the vinyl stencil in place on the canvas.

DIY personalized trick or treat bags

Paint and remove vinyl. Allow paint to dry 4 hours.

*Using a black Sharpie, I traced around the ghost where his white body met with the white chevron.

DIY trick-or-treat bags

Personalized and so fun! Years of use! Machine washable (inside out) after 72 hours.

DIY personalized trick or treat bags

*This post is sponsored by Happy Crafters. Tutorial, experience and opinion is my own. See more projects at Happy Crafters blog.

HClogopngsmall

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s